S25P System Overview - Dell Force10 S25-01-GE-24P Manual

Chapter 1
The Force10 Networks S25P (Cat# S25-01-GE-24P) is a high performance, low cost, stackable, Layer 2
switch/Layer 3 router that supports 24 SFP (small form-factor pluggable) ports, four built-in 10/100/1000
Base-T ports, and up to four 10-Gigabit (10GbE) ports (XFP or CX4), in two expansion slots. As
highlighted in
ports in the rear panel
Figure 1 The S25P (Front View)
AC1
Stack ID
XFP25
Indicator
XFP26
LED
Alarm
AC1 AC2
XFP25 27
XFP26 P28
Stack ID
RJ-45 Console Port
SFP Port LEDs (1 through 24)
Note: The LEDs labeled AC1 and AC2 are DC1 and DC2 on the S25P-DC (cat.# S25-01-GE-24P-DC).
Figure 2 The S25P (Rear View)
10-Gigabit Modules or Stacking Modules (optional)
28 27
Ethernet Port Numbers 25 to 28
(numbered right to left, facing rear)
Note: For the back panel of the S25P-DC, see
Installing the S25P System

S25P System Overview

Figure 1, the front panel of the S25P contains a status panel that displays activity of the XFP
(Figure 2). For stacking details, see
Status Panel
LEDs
OK Alarm
AC2
XFP27
XFP28
SFP Ports (1 through 24)
Label (Part #, Serial #, MAC Address, Bar Code, FRU #)
26
Connecting Stack Ports (optional) on page
Catalog # (S25-01-GE-24P)
25
Ground Connector
Figure 4 on page 15
Copper Ports 21-24 with
Speed and Link/Active
Indicator LEDs
S25-01-GE-24P
Shared Port IDs (21-24)
Dual AC Power Receptacles
and Supplying Power on page
25.
27.
9