Canon imagePROGRAF iPF6400 Setup Manual page 11

15
Click Quit.
The software installation is now
completed. Next, connect the printer to
the computer.
Select the printer to setup
17
Click Next.
20
Click Finish.
• To register another printer, click
Continue Registration, and repeat
MEMO
steps 17 to 19.
Install the electronic manuals
23
Next, install the electronic manuals.
Insert the provided User Manuals
CD-ROM in the CD-ROM drive.
26
Check the message and click Continue.
Connect the printer to a computer
16 16
Make sure that the printer is on, and then connect the printer to the computer or the network
with a cable.
• For USB connections
• Be careful not to insert the USB cable into the LAN port.
MEMO
18
Select the printer to setup and
click Next.
• To register the printer by entering its IP
address, click Registering IP Address.
MEMO
Enter the IP address of the desired
printer in IP Address and click Next.
21
Click OK.
• If the same model of printer is already
registered on the computer, a screen is
MEMO
displayed for printer selection. Select
the desired printer and click Next.
24
Double-click the iPFxxxx Manual
Installer icon on the CD-ROM. (iPFxxxx
represents the printer model.)
27
After reading the software license
agreement, click Continue.
11
• For network connections
19
After entering your preferred name for
the printer in Printer Name and the
installation location in Location, click
Register.
22
The following screen is displayed and
paper information is updated. When the
paper information has been updated, the
screen is no longer displayed.
25
Select the region where the printer will
be used and the language of the user
manual to install, and then click OK.
28
Click Agree.