Top Speakers - HP ENVY dv6-7200 Maintenance And Service Manual

Top speakers

Description
Top speakers (include speaker cables)
Before removing the top speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the top speakers:
1. Fold back the shielding (1) that covers the top speaker cables.
2. Release the top speaker cables (2) from the clips and routing channel built into the top cover.
3. Remove the two Phillips PM2.5×3.5 screws (3) that secure the top speakers to the top cover.
Battery on page 51), and then remove the following components:
Hard drive on page 52)
Optical drive on page
Keyboard on page 61)
Top cover on page 66)
59)
Component replacement procedures
Spare part number
682095-001
69