Top Cover - HP ENVY dv6-7200 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad and cable)
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
NOTE: When replacing the top cover, be sure to remove the following components from the defective
top cover and install them on the replacement top cover:
●
Top speakers (see
●
Power button board and cable (see
●
Fingerprint reader board (see
●
TouchPad button board (see
Remove the top cover:
1. Remove the seven Phillips PM2.5×8.5 screws that secure the top cover to the computer.
66 Chapter 4 Removal and replacement procedures
Battery on page 51), and then remove the following components:
Hard drive on page 52)
Optical drive on page
Keyboard on page 61)
Top speakers on page 69)
Power button board on page
Fingerprint reader board on page
TouchPad button board on page
59)
70)
71)
73)
Spare part number
708033-001