Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP ENVY dv6-7200 Maintenance And Service Manual

4 Removal and replacement
procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P0 and P1 screw drivers

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
care when handling the plastic parts. Apply pressure only at the points designated in
the maintenance instructions.

Cables and connectors

CAUTION:
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
Using excessive force during disassembly and reassembly can damage plastic parts. Use
When servicing the computer, be sure that cables are placed in their proper locations
Preliminary replacement requirements
45