Table of Contents
Advertisement
Chapter 2 - Installation
2.2 Connecting the PC to the SMC7003ADSL
2.2.1 ETHERNET CONNECTION
style dialog box shown as an example)
A. Configuration of the PC for the GUI:
1. Follow Steps 1 through 5 as shown on the next page and restart the PC.
2. In Step 5, the IP address needs to be of the same class as the SMC7003ADSL. For
example: The IP address should be 10.0.0.2 if the default IP address of the unit is
10.0.0.1.
3. The Subnet Mask should be 255.255.255.0.
B. If the SMC7003ADSL is configured as a Bridge:
1. Follow Steps 1 through 14 as shown on the next page using the ISP parameters
from the worksheet.
C. If the SMC7003ADSL is configured as a Router:
1. Follow Steps 1 through 4 as shown on the next page.
2. In Step 5, select Obtain an IP Address Automatically.
3. Continue to Step 6.
4. In Step 7, the Gateway Address is the LAN IP Address of the unit. By default, it
is 10.0.0.1.
10
(Windows 95/98 & Windows Me
SMC7003ADSL (version 1.0)
Advertisement
Table of Contents
