Event Log Message; Downstream Acquisition Failed - SMC Networks EZ Connect SMC8002CM Installation Manual

Event log message can be divided into the items listed below. Detailed information can
be found in each section.

• Downstream Acquisition Failed

• Faile d to Obtain Upstream Parameters
• Ranging Failed : RNG-REQ Ranging Request
• Ranging Failed : RNG-RSP Ranging Response
• Registration Failed : REG-REQ Registration Request
• Registration Failed :REG-RSP Registration Response
• DHCP and TOD FAILED before registration
• TOD FAILED
• TFTP FAILED
• SW Upgrade
Downstream Acquisition Failed
ID Text
0 T00.0 SYNC Timing Synchronization
1 T01.0 Failed to acquire QAM/QPSK
symbol timing. Error stats? Retry #'s?
2 T02.0 Failed to acquire FEC framing.
Error stats? Retry #'s? # of bad frames?
3 T02.1 Acquired FEC framing. Failed to
acquire MPEG2 Sync. Retry #'s
4 T03.0 Failed to acquire MAC framing.
Error stats? Retry #'s? # of bad frames?
5 T04.0 Failed to Receive MAC SYNC
frame within time-out period.
6 T05.0 Loss of Sync. (Missed 5 in a row,
after having SYNC'd at one time)
SMC8002CM Installation Guide

EVENT LOG MESSAGE

21