NEC Express5800/320Fd-LR User Manual page 89

3 -
4 sdd(sdj) [3] AAA/BBB/#DDD
5 -
6 -
<Explanation of items>
Slot slot number of built-in disk
Name device name (kernel device name)
"-" is displayed for built-in disk that is not recognized by kernel.
use current mount count
Information vendor name/model/serial number
path SCSI path (described as h<HOST number>c<CHANNEL number>t<TARGET
number>l<LUN>)
Disk settings (RAID construction)
Use ftdiskadm to construct RAID. Configure disks as follows:
IMPORTANT:
You must execute the following operations as root user.
1. By selecting [Make Mirroring Arrays (RAID 1)] of ftdiskadm, arbitrary partitions are
created for a disk specified by the slot number Then the partitions are copied to its
corresponding pair disk automatically to create duplication.
The following is an example of configuration of disks set in slot 2 and 5 through creating
partitions of the disk to creating duplication.
# ftdiskadm
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command:3
[Make Mirroring Arrays (RAID1)]
* Which scsi SLOT? [1-6] 2 <<Enter the slot number of the disk you want to configure
duplication. The slot number of the pair disk (5) is also available.>>
Making the disk partition table: SLOT=2 SIZE=74752(MB)
Reserved for the last partition: SIZE=1024(MB)
* How many partitions? [1-14] 3
* Input the SIZE of partition 1 [1- 73728(MB)]
* Input the SIZE of partition 2 [1- 63488(MB)]
* Input the LABEL [1-12 character(s)]
* Are you sure to create it? [y/n] y
(RAID1)
(RAID1)
(RAID1+0)
(RAID1+0)
partition 3
Linux Setup 4-29
<<< *1 >>>
1024
2024
14271
<<< *2 >>>
h6c0t128l0