NEC Express5800/320Fd-LR User Manual page 68

4-8 Linux Setup
Press the POWER switch which is located on the front side of the server. (This is the side
3.
on which the in-built LED is lit.)
CPU/IO module 0
Power LED
CPU/IO module 0
Status LED
CPU/IO module 1
Power LED
CPU/IO module 1
Status LED
CPU/IO module 1
IMPORTANT:
Do not turn off the power before the "NEC" logo appears.
After a while, the "NEC" logo will appear on the screen.
While the "NEC" logo is displayed on the screen, NEC Express5800/ft series is performing
a power-on self test (POST) to check itself. For details, see the separate volume of User's
Guide.
CHECK:
If the server finds errors during POST, it will interrupt POST and display the
error message. See the separate volume of User's Guide.
CPU/IO module 0
CPU/IO module 0
POWER switch
CPU/IO module 1
Power switch
Front side of device
CPU/IO module 0
DISK ACCSSS LED
CPU/IO module 1
DISK ACCESS LED