Report Setting
To report from the NEC ESMPRO Agent to the NEC ESMPRO Manager, you need to set the
method of report.
Setting of Manager (SNMP)
1. Log in the system as a root user.
2. Move to the directory where the NEC ESMPRO Agent is installed.
# cd /opt/nec/esmpro_sa
3. Move to the directory where the Report Setting tool is stored.
# cd bin
4. Start the Report Setting tool.
# ./ESMamsadm
The [Report Setting] screen will appear.
5. Select [Base Setting].
The [Base Setting] screen will appear.
Procedures after Completion of Installation 5-11