NEC Express5800 series User Manual page 9

Chapter 2
Installing the NEC ESMPRO Agent
Installing the NEC ESMPRO Agent software in Windows systems involves the following
procedures:
– Ensuring that the TCP/IP protocol and SNMP services are running.
– Configuring the SNMP Agent for NEC ESMPRO, including defining a community in
SNMP and specifying the Manager IP address.
– Installing System update.
– Installing the NEC ESMPRO Agent software on each server you want to monitor.
NOTE:
before installing the NEC ESMPRO Manager software. This makes
setup easier since it allows the NEC ESMPRO Manager to detect NEC
ESMPRO Agents that is installed and running.
INSTRUCTIONS
Follow these steps to install the NEC ESMPRO Agent software on each remote server you want to
monitor.
Verify that TCP/IP is running on the system as follows:
Press the "Start" button, highlight "Settings", and select "Control Panel".
1.
Double click on the "Network Connections" icon.
2.
Double click on "Local Area Connection".
3.
Click on "Properties".
4.
Look at the components checked in "This connection uses the following items:" Verify
5.
that TCP/IP is installed.
Verify that SNMP is running on the system as follows:
Press the "Start" button, highlight "Settings", and select "Control Panel".
1.
Double click on the "Administrative Tools" icon.
2.
Double click on the "Services" icon.
3.
Look at the service list.
4.
Verify that SNMP Services is installed.
Install the NEC ESMPRO Agent software on the servers