NEC Express5800 series User Manual page 22

18 Using the NEC ESMPRO Agent
From the SAF-TE tab you can set the following information:
Sample Interval ⎯ SAF-TE monitoring cycle. The range is 1 to 3600 seconds. It's for
monitoring temperature, power units, or chassis covers on a SAF-TE instrumented system.
This function is automatically enabled only on a SAF-TE instrumented system.
From the Blade Server tab you can set the following information:
Enable report ⎯ To enable the reporting of the event about chassis sensors
(Fan/PowerSupply), check the box.