NEC Express5800 series User Manual page 21

From the WDT tab you can set the following information:
– Monitor System Hangs - To enable the hang monitoring function by Watch-dog timer,
check the box.
– Timeout - Specify the Watch-dog timer timeout.
– Interval - Specify the Watch-dog timer reset interval. The interval ranges from a fifth of
the Timerout to the Timeout.
– Action at timeout - Specify the action at timeout.
– Action after timeout - Specify the action after timeout.
From the Shutdown tab you can set the following information:
– Monitor System Hangs - To enable the shutdown hang monitoring function by Watch-
dog timer, check the box.
– Timeout - Specify the Watch-dog timer timeout.
– Action at timeout - Specify the action at timeout.
– Action after timeout - Specify the action after timeout.
Using the NEC ESMPRO Agent 17