NEC Express5800 series User Manual page 24

20 Using the NEC ESMPRO Agent
From Free Space tab you can change threshold of free block monitoring.
File System List ⎯ Select a file system to change threshold and/or monitoring mode.
NOTE:
Capacity ⎯ Shows the capacity of the file system.
Warning ⎯ Shows warning threshold. In case you want to change threshold, set new
threshold value. You can refer also to the Enable range of threshold option on the Default
tab.
Fatal ⎯ Shows fatal threshold. In case you want to change threshold, set new threshold
value. Please also see "The enable range of threshold" described below.
– The enable range of threshold
You can set the warning and fatal thresholds in the following order.
0(MB) < "Fatal" threshold <= "Warning" threshold < the capacity of file system (MB)
Default button
Set default threshold values to warning and fatal thresholds.
– Default values
Warning: 10 percent of the capacity
Fatal: 1 percent of the capacity
You cannot select the following file systems:
- network drives
- on the removable drive
- not assigned drive letter