NEC Express5800 series User Manual page 13

NOTE:
Windows Server 2003 (Service Pack not installed)
1. Click Start, point to Settings, click Control Panel, and then double-
click Network Connections.
2. Right-click the connection that you want, and then click Properties.
3. Click the Advanced tab, and then click Settings.
4. Click the Service tab, and then click Add.
In the Service Settings dialog box, set the values as follows, and
then click OK.
Description of service
Name or IP address of the computer
hosting this service on your network : Name or IP address of
External Port number for this service : 161
Select
5. Close the Network Connections window.
On Windows systems, the NEC ESMPRO Agent needs the necras.sys driver. To install the
necras.sys, run the System update from EXPRESSBUILDER CD-ROM.
Setup of Firewall
Installing the NEC ESMPRO Agent 9
: snmp
the computer
: UDP