Hardware Setup; Step 1: Applying Power; Step 2: Loading Media - Primera Bravo User Manual

TOC
B. HARDWARE SETUP
Bravo connects to your Mac in just 5 easy steps. To connect
your new disc publisher, please do the following:
Be sure you have removed the packing tape and cardboard insert prior
to applying power.

Step 1: Applying Power

• Locate the power adapter supplied with your Publisher.
• Place one end of the adapter cord into the power port
on the rear panel of the Publisher.
• Unit will initialize for 30 seconds or so.
Step 2: Loading Media (Discs)
NOTE: Your Publisher can print directly onto virtually any brand of
printable-surface CD/DVD media. Since different brands of discs
have different printable coatings, however, you may need to adjust the
printer driver
CD/DVD media. Refer to Section 3 for further printer driver
information.
Due to the wide variety of printable-surface CD/DVD media, you
may find that certain brands of discs provide higher print quality
than others. For maximum
authorized by Primera.
settings to accommodate your specific brand of
print
INDEX
quality, use CD/DVD media
Software and Hardware Set-Up 9