Primera Bravo Se Quick Start

5c Installing the Printer Driver (Mac)
Connect the
Publisher to
your PC with
your beige USB
2.0 Cable.
Add the Publisher via the Printer Setup Utility.
1. Open the Printer Setup Utility located in the
Applications - Utilities folder.
6

Installing the Ink Cartridge

• With the cover open, press the button on the
top of the Publisher to move the Ink
Cartridge Carrier to the load position.
• Open the cartridge cover by pressing down
on the tab.
• Remove the ink cartridge from its
packaging.
• Slowly remove the tape
covering the cartridge's
print head.
DO NOT TOUCH THE
COPPER AREA!
7 Aligning the Cartridge
If you are using a PC
the Installer will prompt you to align the cartridge.
If you are using a Mac
you will be prompted to align the cartridge before you print for the first time.
Note: An alignment print is required every time you install a new cartridge. The software will always prompt you to
align the cartridges. Make sure there is an unprinted disc in the bin for this alignment.
8
Publishing a Disc
Congratulations, you are now ready to start Publishing discs!
• For Instructions on copying a disc using a PC refer to section 3 in the User's Manual.
• For Instructions on copying a disc using a Macintosh refer to section 4 in the User's Manual.
• For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html.
2. Click Add. Select the Disc Publisher SE from
the list of available printers. Click Add again.
• Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
• Close the Publisher's front cover.
P/N 510964 - 071907
TM
AUTOPRINTER
Automated Optical Disc Automated Optical Disc
Duplication & Printing System
Duplication & Printing System
© 2007 All rights reserved