Table of Contents
Advertisement
2 2 / / USING YOUR APPLIANCE
• •
SWITCHING ON GAS BURNERS
The burner safety measure is a metal rod
located directly to the side of the flame.
Each burner is controlled by a tap fitted with
a safety system that, in the event of accidental
flame extinction (spills, draughts, etc.),
quickly and automatically cuts the gas supply
and prevents it from being released.
Each burner is supplied by a tap that is
opened when you press in the knob and turn
it in a counterclockwise direction.
o
The "
" point corresponds to a closed tap.
— — Select the desired burner by referring to the
symbols located near the knobs (e.g. front
right burner
Your hob is fitted with a burner-lighting
system built into the knobs.
— — To light a burner, press on the knob and turn
it in a counterclockwise direction
maximum setting
— — Continue to press on the knob to produce a
series of sparks until the burner lights.
The setting for more moderate flame
intensities are between the
symbol.
Tip
In order to ensure the proper lighting
of the double crown burner, we suggest
that you light it before placing cookware on
it.
When a knob becomes difficult to turn, do
not force it. Request an emergency service
call from the installer.
Warning
Hold the knob completely pressed
down for a few seconds after the flame
appears to trigger the safety system.
).
.
symbol and the
Fig. 01
to the
51
Advertisement
Table of Contents
