Table of Contents
Advertisement
Before you start
Using the touch buttons
To operate the touch buttons, touch the desired button with the tip of your pointed
finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one button when operating the appliance. If
your finger is too flat on the button, an adjacent button may be actuated as well.
Operating noises
If you can hear.
•
Cracking noise: cookware is made of different materials.
•
Whistling: you use more than two cooking zones and the cookware is made of
different materials.
•
Humming: you use high power levels.
•
Clicking: electric switching occurs.
Hissing, Buzzing: the fan operates.
•
The noise are normal and do not refer to any defects.
WARNING
Do not use cookware of different size and material.
Using cookware of different sizes or materials may cause noises and vibrations.
NOTE
Using low power levels (1-5) may cause clicking noises.
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic hob glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
18 English
Operation
Switching the appliance on
The appliance is switched on using the On/Off
approximately 1-2 seconds.
NOTE
After the On/Off
key has been actuated to switch on your appliance, a power
level must be selected within approximately 20 seconds. Otherwise, the appliance
will switch itself off for safety reasons.
Switching the appliance off
To completely switch off the appliance, use the On/Off
Press the On/Off
key for approximately 1-2 seconds.
NOTE
After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an
The temperature is lowered,
,
wil be disappeared.
key. Press the On/Off
key for
key.
,
two steps for "hot".
Advertisement
Table of Contents
