Table of Contents
Advertisement
2 2 / / USING YOUR APPLIANCE
• •
SWITCHING ON GAS BURNERS
The burner safety measure is a metal rod
located directly to the side of the flame.
Each burner is controlled by a tap fitted with
a safety system that, in the event of acciden-
tal flame extinction (spills, draughts, etc.),
quickly and automatically cuts the gas supply
and prevents it from being released.
Each burner is supplied by a tap that is
opened when you press in the knob and turn
it in a counterclockwise direction.
o
The "
" point corresponds to a closed tap.
— — Select the desired burner by referring to the
symbols located near the knobs (e.g. front
right burner
Your hob is fitted with a burner-lighting sys-
tem built into the knobs.
— — To light a burner, press on the knob and turn
it in a counterclockwise direction
maximum setting
— — Continue to press on the knob to produce a
series of sparks until the burner lights.
The setting for more moderate flame intensi-
ties are between the
symbol.
Tip
In order to ensure the proper lighting
of the double crown burner, we suggest
that you light it before placing cookware on
it.
When a knob becomes difficult to turn, do
not force it. Request an emergency service
call from the installer.
Warning
Hold the knob completely pressed
down for a few seconds after the flame
appears to trigger the safety system.
).
.
symbol and the
Fig. 01
to the
51
Advertisement
Table of Contents
