Table of Contents
Advertisement
Hob use
Energy saving tips
NOTE
You can save valuable energy by observing the following points.
Using the touch buttons
To operate the touch button, touch the desired button with the tip of your pointed
finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one button when operating the appliance. If
your finger is too flat on the panel, an adjacent button may be actuated as well.
12 English
CTR432NB02_XSP_DG68-00315C-00_EN.indd 12
•
Always position pots and pans before
switching on the cooking zone.
•
Dirty cooking zones and pan bases
increase power consumption.
•
When possible, position the lids
firmly on the pots and pans to cover
completely.
•
Switch the cooking zones off before
the end of the cooking time to use the
residual heat for keeping foods warm
or for thawing.
•
The base of the pan should be the same
size as the cooking zone.
•
Using a pressure cooker reduces
cooking times by up to 50 %.
Switching the appliance on
1.
2.
NOTE
After the On/Off
button has been actuated to switch on your appliance, a
heat setting must be selected within approximately 10 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
Temperature control
For setting and adjusting the power
level (
corresponding cooking zone's
buttons.
The first time
is set to
The first time
is set to
Use the
setting and the
Touch the Lock
button for
approximately 3 seconds.
The appliance is switched on using the
On/Off
button. Touch the On/Off
button.
•
The digital displays will show
.
to
) for cooking, touch the
,
is pressed, the heat level
.
is pressed, the heat level
.
button to increase the heat
button to decrease.
2017-07-24
6:00:35
Advertisement
Table of Contents
