Download Print this page

Charging The Battery Pack; Akku Laden - Samsung VP-X300L Owner's Instruction Book

Sports camcorder
Hide thumbs Also See for VP-X300L:

Advertisement

ENGLISH
How to Use the Battery Pack

Charging the battery Pack

1. Turn off the Sports Camcorder
by pressing the [POWER] button.
◆ Make sure you turn the power
off when using the USB cable.
2. Insert the battery pack to the
unit.
3. Open the connector cover of the
unit.
4. Charge the battery pack by using
AC Power Adapter or USB Cable.
C onnect the AC Power
Adapter with the Sports
AC Power
Camcorder and plug the
Adapter
AC Power Adapter to the
wall outlet.
C onnect the USB Cable
with the Sports
USB Cable
Camcorder and connect
the other side to a USB
port on your PC
[ Note ]
✤ You may use the Sports Camcorder
powered by the AC Power Adapter
indoors where available.
[ Warning ]
✤ It is recommended you fully charge
the battery pack before use.
✤ You should only charge the battery
in an environment between 32°F
and 104°F.
✤ If ambient temperature is too low
when charging, the battery may
take a long time to fully charge, or
may not charge completely and the
green indicator will not turn on.
✤ Before connecting the cable,
make sure that you don't have any foreign substances between
24
24
connectors.
Akku verwenden

Akku laden

Connecting the AC Power Adapter
DC IN jack
Connecting the USB Cable
USB port
DEUTSCH
1. Schalten Sie den Sports
Camcorder aus, indem Sie die Ein/
Aus-Taste drücken.
◆ Schalten Sie vor dem Anschließen
des USB-Kabels das Gerät immer
aus.
2. Setzen Sie den Akku ein.
3. Öffnen Sie die
Anschlussabdeckung am Gerät.
4. Laden Sie den Akku über das
Netzteil oder das USB-Kabel.
V erbinden Sie das Netzteil
korrekt mit dem Sports
Netzteil
Camcorder, und schließen
Sie es an eine Steckdose
an.
V erbinden Sie das USB-
Kabel mit dem Sports
USB-
Camcorder. Verbinden Sie
Kabel
das andere Ende mit dem
USB-Anschluss des PCs.
[ Hinweis ]
✤ Bei Innenaufnahmen können Sie den
Sports Camcorder über das Netzteil
mit Strom versorgen.
[ Achtung ]
✤ Es wird empfohlen, den Akku vor
Inbetriebnahme vollständig aufzuladen.
✤ Laden Sie den Akku nur bei
Umgebungstemperaturen zwischen 0°
C und 40°C auf.
✤ Falls die Umgebungstemperatur
beim Aufladen sehr niedrig ist, kann
sich die Aufladezeit verlängern.
Möglicherweise wird der Akku nicht
vollständig aufgeladen, so dass die
grüne Ladeanzeige nicht aufleuchtet.
✤ Bevor Sie das Kabel anschließen,
vergewissern Sie sich, dass die
Anschlusskontakte gereinigt sind.

Advertisement

loading

This manual is also suitable for:

Vp-x300