Charging The Battery Pack; Using Hardware Reset Function - Samsung VP-M2050S(B) Owner's Instruction Book

ENGLISH
How to Use the Battery Pack

Charging the Battery Pack

1. Attach the Battery Pack to the CAM.
2. Move [POWER/MODE Selector] up to
turn the CAM off.
3. Connect the AC Power Adapter with the
CAM.
N You can detach the AC adapter by
pressing the buttons on the sides of
the adapter cable plug while pulling it
out.
4. Insert the AC Power Adapter into the
outlet.
Note
✤ You can charge the Battery Pack when
you use the CAM, but it takes a long time
relatively.
Warning
✤ It is recommended you fully charge the Battery Pack before use.
✤ You should only charge the battery in an environment between
0°C and 40°C.

Using Hardware Reset Function

1. Remove the Battery Pack and the AC Power
Adapter.
2. Press and hold the [RESET] button over one
second.
Note
✤ If you reset the CAM, all functions you set are
initialized.
Charging directly to the CAM
4
1
3
✤
✤
1.
2. [POWER/MODE
3.
N
4.
✤
0 C 40 C
1.
2. [RESET]
✤
]
1
23 23