Error Codes - Xerox Phaser 3010 User Manual

Error Codes

Error Code
—
—
—
—
—
Status
Ready
Downloading print.
Warming up.
Waking from Energy Saver Sleep
mode.
Printing when the toner is low.
In Energy Saver mode.
Out of paper.
Waiting for manual 2-sided printing. Remove the paper from the output tray
Paper is jammed.
The wrong size paper is loaded.
Canceling the print job.
Non-volatile memory is initializing.
Toner cartridge is empty.
The rear cover is open.
Print engine error.
The printer has a fatal error.
Solutions
Normal operation.
Normal operation.
Normal operation.
Load paper, then press the button on the
control panel.
and reload it into the paper tray.
See Loading Paper for Manual 2-Sided
Printing on page 22.
Clear the paper jam.
See Clearing Paper Jams
Load the correct paper.
Wait for the print job to cancel.
Do not turn off the printer.
Note: Interrupting the initialization of
the non-volatile memory can damage
the printer.
Replace the toner cartridge.
Close the rear cover.
Turn off the printer, then turn it on again.
Turn off the printer, then turn it on again.
Contact your Xerox representative.
Phaser 3010/3040 Printer
User Guide
Troubleshooting
on page 41.
55