Xerox DocuPrint C3300 DX User Manual page 89

Item
Job Time-out
Auto Job History
Print ID
Print Text
Banner Sheet
RAM Disk
Sets the amount of time the printer waits for a print job. If a time-out occurs during data
reception, the printer stops the reception and prints the data that has been received.
• [5 Seconds] to [300 Seconds] (default: [30 Seconds])
Specify the time-out value in 1 second increments.
• [Off]
Disables the job time-out.
Sets whether to automatically print a report on the completed print jobs ([Job History
Report]).
• [Off] (default)
Does not automatically print the [Job History Report].
• [On]
Automatically prints the [Job History Report] when the number of print jobs processed
reaches 20.
Note
• You cannot set this during printing.
• You can print the [Job History Report] from the [Report / List] menu.
• You need to restart the printer to activate the new settings. After making the settings,
switch the printer off and then on again.
Prints a user ID on the specified location.
• [Off] (default)
Does not print a user ID.
• [Top Left]
Prints a user ID on the top left corner of paper.
• [Top Right]
Prints a user ID on the top right corner of paper.
• [Bottom Left]
Prints a user ID on the bottom left corner of paper.
• [Bottom Right]
Prints a user ID on the bottom right corner of paper.
Sets whether the printer outputs PDL data, which is not supported by the printer, as text
when the printer receives it. Text data is printed on A4 or Letter size paper.
• [Off]
Does not print the received data.
• [On] (default)
Prints the received data as text data.
Specifies the settings for the banner sheet.
• [Insert Position](default:[Off])
Selects the position to output the banner sheet from [Off], [Start Sheet], [End Sheet],
and [Start&End Sheet]. When [Off] is selected, the banner sheet is not printed.
• [Select Tray](default:[Tray 1])
Specifies the tray from which the banner sheet is output: [Tray 1], [Tray 2], or [Bypass
Tray].
Note
• [Tray 2] is displayed only when the optional sheet feeder is installed.
Allocates memory to the RAM Disk file system for the Secure Print/Sample Print
feature.
• [50MB] to [1000 MB]
Allocates memory for using the Secure Print/Sample Print feature. Specifies the
value in 50 MB increments. The maximum value differs depending on the capacity of
your additional memory.
• [Off] (default)
Does not allocate memory for using the Secure Print/Sample Print feature.
Note
• [RAM Disk] appears only when the additional memory (optional) is installed.
Description
5.2 Description of Menu Items
89