Table of Contents
Advertisement
Note
• You can check whether the memory card is installed
correctly by printing out the [Printer Settings] list.
[Memory Capacity] under [General] shows the total
memory capacity of the printer (which is the memory on
the controller board (64 MB) plus the memory you just
added). For information on how to print the [Printer
Settings] list, refer to " Printing a Report/List" (P. 31).
• If you added memory while the printer is in use, change
the memory capacity setting on your print driver. For
details, refer to the online help provided for the print
driver.
74
A Appendix
Installing the Internal Hard
Disk
The hard disk must be installed to the printer when
you use the Secure/Sample Print feature.
WARNING
• This equipment has been designed to restrict
operator access to safe areas only. Operator
access to hazardous areas is restricted with
covers or guards, which would require a tool to
remove. Never remove these covers or guards.
Important
• Before plugging or unplugging the interface cable
connector, be sure to switch off the printer or unplug the
power cord from the power outlet. Plugging or
unplugging the connector when the printer is on can
cause printer failure.
Checking the Package Contents
The packaging box contains the following items. If
you find any items missing, please contact our
Customer Support Center or your dealers.
• Hard disk
• 2 Screws
Important
• Before touching the hard disk, touch a metal surface to
discharge any static electricity.
Advertisement
Table of Contents
