Sleep Operation - Haier HSU12XCK Service Manual

Operation

Sleep Operation

Press button to enter additional options, when
cycle display to ,
enter to sleep function.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become
O higher than temp.setting.After another 1 hours,
1 C
temp.risesby 1 O C futher .The unit will run for further
6 hours then stops Temp. is higher than temp.setting
so that room temperature won't be too low for your
sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
2. In AUTO mode
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation
mode.
3. In FAN mode
It has no SLEEP function.
will flash. And then press
SLEEP operation stops
Approx.6hrs
O
Rises 1 C
O
C
Unit stop
HSU09/12XCK-SM
4.Set the wind speed change when sleeping
If the wind speed is high or middle before setting for the
sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
Note
When TIMER function is set, the sleeping function can't be
set up .After the sleeping function is set up
TIMER function, the sleeping function will be cancelled; the
machine will be in the state of timing-on.
POWER/QUIET Operation
(1)
POWER Operation
When you need rapid heating or cooling, you can use this function.
Press button to enter additional options, when cycle
display to
power function. When cancel the function, please enter
additional options again and to cancel power function.
(2)
QUIET Operation
You can use this function when silence is needed for rest or reading.
Press QUIET button, the remote controller will show
and then achieve to the quiet function. Press again this
QUIET button , the quiet function will be cancelled.
Note
During POWER operation, in rapid HEAT or COOL mode ,
the room will show inhomogeneous temperature distribution.
Long period QUIET operation will cause effect of not too
cool or not too warm.
24
, will flash and then press
,
if user resets
,enter to
,