Advertisement
⑧ Battery Compartment
Remove the battery compartment lid by sliding it down. Install two fresh alkaline "AA"
batteries. Make sure the battery polarity is correct as marked inside the battery
compartment.
⑨ Install two fresh alkaline "AA" batteries. Make sure the battery polarity is correct as
marked inside the battery compartment.
Inside the battery compartment, you will also find:
⑩ MIC Input Level Control
This control enables you to adjust the input level of the microphone. Using the
supplied tool, also found inside the battery compartment, turn the orange dial
clockwise to increase, or counterclockwise to decrease the input level.
⑪ POWER Switch
Switches the 35BT Transmitter "ON" or "OFF".
⑫ MIC Input Jack
Plug the supplied EX-503L Lavalier Microphone into the MIC input jack. In addition to
the EX-503L, other lapel and/or headset microphones with 3.5mm mini plug may also
be used with the 35BT.
⑬ LCD Display
The display shows the following information:
TV Ch – Transmit Channel Number (i.e. 30 – 01, 31 – 12, 33 – 47)
The TV – Transmit channel display is made of two parts. The first two digit
number is the actual TV channel (30-33) and the second two digit is the
transmit channel number (01-47).
Battery level by 3-bar indicator (3 bars = High, 1 bar = Low)
⑭ AUDIO Switch
It is best to set the AUDIO switch to "OFF" prior to first turning the POWER switch "ON".
When you are ready to begin transmitting, turn the AUDIO "ON". The "OFF" position
acts as "mute" that maintains the RF signal but turns off the audio.
7
Advertisement
