Table of Contents
Advertisement
CONTROLS AND FEATURES
PC Audio
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the
'Connecting a computer' section), and then use the PC/HDMI 2
Audio setting.
a
In the PREFERENCES menu, press
Connection and press OK.
b
B
b
Press
or
to highlight PC/HDMI 2 Audio, and
C
c
then press
or
to select the PC option.
NOTE: Selecting the PC option will force HDMI 2
Audio to Digital mode.
HDMI 2 Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 2 (AUDIO) on the back of
the television (as shown in the 'Connecting an HDMI
device to the HDMI input' section), then use the HDMI 2 Audio
setting.
a
In the PREFERENCE menu, press
Connection and press OK.
b
B
b
Press
or
to highlight HDMI 2 Audio, and then
C
c
press
or
to select Auto or Analogue.
AV Connection
Input Labeling
PC/HDMI 2 Audio
Side Shared Audio
HDMI 2 Audio
HDMI Settings
Colour Decoding
Digital Audio Output
If the sound is absent, try selecting a different setting.
NOTE: HDMI 2 supports digital and analogue sound,
HDMI 1, HDMI 3 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
Side Shared Audio
The AUDIO terminals for the COMPONENT VIDEO INPUT
(EXT 2) and VIDEO INPUT (EXT 3) are shared.
Select an appropriate option (EXT 2 or EXT 3) for the input that
you are using.
a
In the PREFERENCES menu, press
Connection and press OK.
b
B
b
Press
or
to highlight Side Shared Audio, and
C
c
then press
or
to select EXT 2 or EXT 3.
Some early HDMI equipment may not work properly with your
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
b
to highlight AV
a
b
c
®
or DVI
b
to highlight AV
• Enable Content Type: On
• INSTAPORT™: On
HDMI 2
• RGB Range: Auto
EXT 2
Auto
Auto
Auto
NOTE:
• If your HDMI connection is capable of 1080p and/or your
• All of the above HDMI settings need proper HDMI source
b
to highlight AV
68
HDMI Settings
HDMI TV. Please try setting the Enable Content Type and
television.
In the PREFERENCES menu, press
Connection and press OK.
B
b
Press
or
to highlight HDMI Settings and press
OK.
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
B
b
Press
or
to select an item, and then press
to select a setting.
HDMI Settings
Enable Content Type
INSTAPORT
TM
RGB Range
This feature is part of the HDMI1.4 standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent from
the connected HDMI device.
This feature reduces the lag time when switching
HDMI sources.
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
b
to highlight AV
C
c
or
On
On
Auto
Advertisement
Table of Contents
