Table of Contents
Advertisement
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to Standby.
To set up the television, use the buttons on the
remote control as detailed on page 7.
Quick Setup
a
1
Press the
button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b
B
b
C
c
Press
,
,
, or
then press OK.
c
Highlight Country and
is now set to tune the stations for your country.
Quick Setup
Country
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d
Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
e
C
c
Press
or
to select Home or Store. For normal
home use, select Home.
f
Press OK. If Store is selected in step 5, a Store mode
confirmation window will appear. If you select Yes
from that window, the TV will proceed to the Auto
Demo setup screen.
to select the menu language, and
C
c
or
to select. The television
Germany
English
English
English
English
Home
g
Press OK, and the TV Mounting screen will appear,
C
c
press
or
TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
h
Press OK, and the AutoView screen will appear, press
C
c
or
to select Yes or No.
AutoView
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
i
Press OK. If the Ant/Cable/Satellite screen appears,
B
b
press
or
and then press OK to check (
If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 10
to 13.
• When you select Satellite, skip to step 14.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.
j
Select Next and press OK. The Auto Tuning startup
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
to select the appropriate mode.
k
B
b
Press
or
to highlight Start Scan, and then press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
15
SETTING UP YOUR TV
to select Stand or Wall.
Stand
No
to select Antenna, Cable or Satellite,
).
Ant / Cable / Satellite
Antenna
Cable
Satellite
Next
C
c
or
Advertisement
Table of Contents
