Delete A Channel; Change Station Channel Position - Philips VR20D/07 User Manual

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on
page 58 to access the Confirmation screen before continuing.
SELECT ITEM
1
@ #
Press % fi
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press CLEAR.
The item directly beneath the cancelled one moves
up one line.
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Change Station Channel
Position
Perform steps 1 and 2 of "Storing Channels Manually" on
page 58 to access the Confirmation screen before continuing.
SELECT ITEM
1 @ #
Press % fi
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
@ #
Press % fi
to move the station to the new channel
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
PR CH ID PR
01 26 BBC1 08
02 23 ITV 09
03 30 CH4 10
04 33 BBC2 11
05 37 CH5 12
06 –––– 13
07 –––– 14
[ 5 ∞
] : MOVE
: MANUAL CH SET
[MENU] : EXIT
Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
CH ID
PR CH ID PR
––––
01 26 BBC1 08
––––
02 33 BBC2 09
––––
03 23 ITV 10
––––
04 30 CH4 11
–––– 05 37 CH5 12
––––
06 –––– 13
––––
07 –––– 14
[ 5 ∞ ] : MOVE =
[MENU] : EXIT
When Receiving A
Scrambled Broadcast
SELECT DECODER MODE
1
Set "AV2 SELECT" to "DECODER" (
ACCESS CONFIRMATION
SCREEN
2
Perform steps 1 and 2 of "Storing Channels Manually"
on page 58.
SELECT POSITION
3
Press % fi
ing scrambled programmes, then press OK twice.
CHANGE DECODER SETTING
4 #
Press
and set it to "ON" by pressing % fi.
RETURN TO CONFIRMATION
SCREEN
5
Press OK.
Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
NOTE:
Scrambled programmes are not currently broadcasted in the U.K.
ATTENTION
CH ID
––––
––––
If channel positions are changed or deleted, the Guide
––––
Program numbers that have been set are reset.
––––
––––
Example 1: If a channel is deleted, all the Guide Program
––––
––––
Example 2: If a channel is changed from position 4 to
Example 3: If a channel is changed from position 4 to
* In Examples 2 and 3, if the channel is moved to position
10 before OK is pressed, the Guide Program numbers
above position 10 are reset.
If an attempt is made at timer programming with the
VIDEO Plus+ system in this state, the "GUIDE PROG
SET" screen appears; set the Guide Program numbers on
this screen.
Number Set" on pg. 31.
Or perform "Guide Program Number Set" (
@ #
to select the channel position broadcast-
until "OFF" (decoder setting) begins blinking,
numbers are reset.
position 2, the Guide Program numbers
above position 4 are reset.
position 6, the Guide Program numbers
above position 6 are reset.
"ATTENTION – Regarding Guide Program
59
EN
pg. 50).
pg. 55).