Synchro Editing - Philips VR20D/07 User Manual

Synchro Editing

(S-VHS/VHS Mode
Only)
Recorder
SYNCHRO EDIT
connector
Player
Camcorder
To LANC connector
The Synchro Editing function synchronizes the start of the
playback and recording operations when starting an edit
operation using a camcorder with LANC connector and your
video recorder.
1
2
3
4
5
6
NOTES:
LANC Cable
The Synchro Editing function is impossible with the connec-
(not provided)
tion using DV connector.
The Synchro Editing function may not work with the initial
part of a camcorder tape.
The Synchro Editing function cannot be used when using the
JLIP function. (Pressing SYNCHRO EDIT cancels the JLIP
function.)
The Synchro Editing function may not work properly with
some type of camcorder.
MAKE CONNECTIONS
Connect your recorder to camcorder (
connect your recorder's SYNCHRO EDIT connector to
the camcorder's LANC connector.
SET RECORDING MODE
Set the appropriate recording mode (S-VHS or VHS)
( pg. 23).
SET RECORDER'S INPUT
MODE
Set the appropriate input mode, depending on the
connectors being used in step 1.
LOCATE START POINT
Start playback of the tape in the camcorder, and pause
playback when you find the point where you want to
start editing. Press and hold PAUSE and press RECORD
on your recorder so that the recorder enters the Record-
Pause Mode.
START SYNCHRO EDITING
Press SYNCHRO EDIT.
PAUSE SYNCHRO EDITING
Press SYNCHRO EDIT again.
Repeat steps 4 – 6 as necessary.
51
EN
pg. 46), and