Av2 Select Setting - Philips VR20D/07 User Manual

50
EN
AV1 SELECT Setting
Set "AV1 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV1 IN/OUT connector of
this recorder.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV1 SELECT".
3
#
4
Press OK or to select "VIDEO" or "S-VIDEO".
a–VIDEO : If a connected device's output is compatible only with regular video signals,
set "AV1 SELECT" to "VIDEO".
b–S-VIDEO : If a connected device's output is compatible with Y/C signals, set "AV1
SELECT" to "S-VIDEO". This setting will let you take advantage of higher-
quality S-VHS pictures.
5
Press MENU to return to normal screen.
If "AV2 SELECT" is set to "DECODER", it is impossible to set "AV1 SELECT" to "S-VIDEO".

AV2 SELECT Setting

Set "AV2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 IN/DECODER
connector of this recorder.
1
Press MENU to access the Main Menu screen.
Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or
2
Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
3
#
4
Press OK or to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with the player connected to the
AV2 IN/DECODER connector, or to use the satellite tuner connected to the
AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the AV2 IN/DECODER connector.
If "AV1 SELECT" is set to "S-VIDEO" and "AV2 SELECT" is changed to
"DECODER", "AV1 SELECT" will be changed to "VIDEO" automatically.
c–SAT : To view a satellite programme with the TV set while the recorder is in
Timer mode, in Stop mode, recording or turned off. (
5
Press MENU to return to normal screen.
If you have a satellite tuner or a decoder connected to the AV2 IN/DECODER connector, be
sure to set "AV2 SELECT" back to appropriate mode after editing.
If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT"
set to "AV2".
The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut
or because the AC was removed from the recorder, "AV2" will be automatically selected when
the power is restored to the recorder. If you are using a satellite tuner or a decoder, be sure to
set "AV2 SELECT" back to appropriate mode.
If the AV1 OUT switch on the rear panel is set to Y/C, it is impossible to set "AV2 SELECT"
to "DECODER".
EDITING (cont.)
#
.
[5∞] =
[MENU] : EXIT
[5∞] =
[MENU] : EXIT
#
.
[5∞] =
[MENU] : EXIT
pg. 53)
[5∞] =
[MENU] : EXIT
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT AV2
DV SOUND SOUND1
AUDIO REC NICAM
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT AV2
DV SOUND SOUND1
AUDIO REC NICAM