Setting The Clock; Manual Channel Number Allocation; Monitor Function; Allocating A Decoder - Philips VR285/07 User Manual

How to search for a TV channel manually, you can read in
chapter 4 'SPECIAL FEATURES', 'Manual channel search'.
Note:
With the button you can interrupt the automatic chan-
OK
nel search. All TV channels found will remain stored.
* If a TV channel transmits a 'TV channel identification' (e.g.
'BBC1'), it appears in the display.

Setting the clock

If the time in the video recorder display is not correct or if
'--:--' appears in the display, please set the clock manually.
1
Switch on the TV set.
2
Press the
AUTOINSTALL
3
Confirm the line 'CLOCK' with the
4
Adjust 'TIME', 'YEAR', 'MONTH', 'DATE' if required, using
the P q or P r button or the digit buttons
TIME
YEAR
MONTH
DATE
------------------------
-/+
5
Confirm each entry with the
Note: If a TV channel which transmits TXT/PDC is stored
with programme number 'P 01', time (from TXT) and date
(from PDC) will automatically be taken from the TXT/PDC
information.

Manual Channel Number Allocation

You can give any desired programme number to the TV
channels stored.
1
Switch on the TV set. Press the
the video recorder.
2
Select 'CHANNEL ALLOCATION' with
the P q or P r button.
Confirm with the button.
OK
button on the video recorder.
button.
OK
.
0-9
20:00
1998
01
01
OK
button.
OK
button on
AUTOINSTALL
3
Use the P r or P q button to select the TV channel on
the TV screen to which you wish to give a programme
number (starting with 'P 01').
4
Confirm this allocation with the
If you wish to allocate further programme numbers, repeat
3 4
step and step until you gave a programme number
to all the required TV channels.
5
To end, press the
STANDBY m
Note: If you want to delete an unwanted TV channel, press
the button at step
CLEAR (CL)
* Monitor function: You can switch to and fro between TV
reception and video recorder reception with the
button. This only functions when you used a scart
MONITOR
cable to connect the video recorder to your TV set and if
your TV set responds to this switch-over.

Allocating a decoder

With this function, the connected decoder will automatically
be activated for the TV programme required.
1
On the video recorder, select the TV programme you wish
to link with the decoder function, using the
button or the digit buttons
P r
2
Press the
AUTOINSTALL
3
Select 'MANUAL SEARCH' with the
4
Confirm with the button.
OK
5
Press the button. In the display appears: 'DEC'
INDEX E
6
Confirm with the button.
OK
7
To end, press the and the
OK
button.
OK
button.
3
.
P q or
.
0-9
button on the video recorder.
P q or P r button.
STANDBY m button.
5