Dv Sound Setting - Philips VR20D/07 User Manual

A If the camcorder has no S-VIDEO output connector...
AUDIO input
VIDEO
input
Audio Cable (not provided)
Video Cable (not provided)
VIDEO OUT
Player
Camcorder
AUDIO OUT
C If the camcorder has a DV OUT connector...
Recorder
DV IN
DV Cable
(not provided)
DV OUT
Player
DV Camcorder
B If the camcorder has an S-VIDEO output connector...
Recorder
S-VIDEO
input
Player

DV Sound Setting

Up to four audio signal channels can be input from a DV
camcorder through the DV IN connector (i.Link). This
recorder allows you to select and record two of these
channels. This setting is used to specify which two
channels to record.
1
2
3
4
AUDIO input
Audio Cable (not provided)
S-Video Cable (provided)
S-VIDEO OUT
Camcorder
AUDIO OUT
Press MENU to access the Main Menu screen.
Move the highlight bar (pointer) to "MODE SET" by
pressing % fi, then press OK or
Move the highlight bar (pointer) to "DV SOUND" by
pressing % fi, then press OK or
"SOUND2" or "FULL".
MODE SET
DSPC ON
O. S. D. ON
DIRECT RECORD ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
S-VHS AUTO
NEXT PAGE
[5∞] =
[MENU] : EXIT
When there are four DV audio channels (32kHz):
SOUND 1: Records the two channels (L/R) of DV
SOUND 1.
SOUND 2: Records the two channels (L/R) of DV
SOUND 2.
FULL: Mixes and records both DV SOUND 1 and
2.
When there are two DV audio channels (48kHz):
Because there are only two channels, those two
channels are recorded regardless of the DV sound
setting.
Press MENU to return to the normal screen.
47
EN
Recorder
#
.
#
to select "SOUND1",
PREVIOUS PAGE
AV1 SELECT VIDEO
AV2 SELECT AV2
DV SOUND SOUND1
AUDIO REC NICAM
[5∞] =
[MENU] : EXIT