Edit To Or From Another Video Recorder - Philips VR20D/07 User Manual

48
EN
Edit To Or
From Another
Video
Recorder
MENU
+ +
1 2 3
4 - 5 - 6
7 8 9
NUMBER "0"
0
PROG. +
PROG. –
+ +
-
-
OK
You can use your video recorder as the source player or as the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 49.
A When Using Your Video Recorder As The Source
Player ...
... connect its AV1 IN/OUT connector to the
recording deck.
B When Using Your Video Recorder As The Recording
Deck ...
... connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
C If Another Recorder Is Compatible With The Y/C
Signal ...
... connect your recorder 's AV1 IN/OUT connector to
another recorder.
With C connection ...
When using your recorder as the recording deck, set
"AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to
"AV2" ( pg. 50).
When using your recorder as the source player, set
the AV1 OUT switch on the rear panel to Y/C
( pg. 6).
SET RECORDING MODE
2
Set the appropriate recording mode (D-VHS, S-VHS or
VHS) ( pg. 22, 23).
SET RECORDING DECK'S
INPUT MODE
3
Set to AUX. With this video recorder, press NUMBER
key "0" and/or PROG. +/– to select "L-1" for the AV1 IN/
OUT connector, or "L-2" for the AV2 IN/DECODER
connector, depending on the connector being used.
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
EDITING (cont.)
pg. 50).