Video Plus; Subsidiary Settings - Philips VR20D/07 User Manual

SUBSIDIARY SETTINGS

VIDEO Plus+

IMPORTANT
Normally, Auto Set Up (
automatically. You need to set the Guide Program Numbers manually only in the following cases.
When timer-programming with the VIDEO Plus+ system, the channel position, where the station you wish to record is
received on your recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.
— Set the Guide Program Number for that station manually.
When you delete a channel or change channel positions manually after Auto Set Up or Auto Channel Set has taken place.
— Set the Guide Program Numbers for all the receivable stations manually.
When you wish to timer-record a satellite programme with the VIDEO Plus+ system.
— Set the Guide Program Numbers for all satellite broadcasts received on your satellite tuner.
Turn on the TV and select the AV mode.
Guide Program Number Set
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS INITIAL SET
SCREEN
2
Press % fi to move the highlight bar (pointer) to
"INITIAL SET", then press OK or
ACCESS GUIDE PROG SET
SCREEN
3
Press % fi to move the highlight bar (pointer) to "GUIDE
PROG SET", then press OK or
ENTER GUIDE PROG
NUMBER
4
Press % fi or NUMBER keys
to enter the Guide Program
number for the desired
station as shown in the TV
listings. Then press OK or
pg. 8), Preset Download (
#
.
#
.
GUIDE PROG SET
GUIDE PROG TV PROG
#
.
4
[5 ∞ ] =
[MENU] : EXIT
(Ex.) When inputting the
Guide Program
number 4 for CH4.
® Setup
pg. 10) or Auto Channel Set (
ENTER RECEIVING
CHANNEL POSITION
NUMBER
5
Press % fi or NUMBER
keys to input the number
of the recorder's channel
position on which the
Guide Program number's
broadcast is received.
Then press OK or
If the satellite broadcast
is received on your
recorder's auxiliary
channel "L-1" or "L-2",
select "L-1" or "L-2" for the channel position,
depending on the connection to the satellite tuner
(
Repeat steps 4 and 5 as necessary.
RETURN TO NORMAL
SCREEN
6
Press MENU.
5
Guide Program Number
"Guide Program (GUIDE PROG) number" refers to the
assigned TV station numbers, according to broadcast area,
for the VIDEO Plus+ timer recording. The Guide Program
numbers can be found in most TV listings.
pg. 56) sets the Guide Program Numbers
GUIDE PROG
#
.
[5 ∞ ] =
[MENU] : EXIT
(Ex.) If CH4 is received on
pg. 53, 54).
55
EN
GUIDE PROG SET
TV PROG
4 4
CH4
channel position 4.