Table of Contents
Advertisement
6.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your video recorder needs
to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC
The video recorder stores all the information in a TIMER block.
You can programme up to 6 TIMER blocks a month in advance.
'VPS' (Video Programming System) and
'PDC' (Programme Delivery Control) (UK)
With 'VPS and PDC', the TV station controls the start time and
the length of the recording. This means that the video recorder
switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
You must enter the start time exactly to the minute.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with 'VIDEO Plus+')
All the information required for a programming is contained in
the PlusCode-programming number.
a
Switch on the TV set and select the programme number
for the video recorder.
b
Press the
button on the remote control.
TIMER
c
Enter the entire PlusCode-programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode-programming number.
If you make a mistake, you can clear your instructions
with the
button.
CLEAR (CL)
VIDEOPLUS
53124----
ONCE
------------------------
D/WgSELECT
0-9
d
Use the
button to select daily or weekly
SELECT
programming.
'D': recordings every day from Monday to Friday.
'W': recordings every week on the same day of the week.
e
Confirm with the
button. Your programming details
OK
will then appear on the TV screen.
DATE PROG START V/P END
01
01
------------------------
CHANGE gTIMER CLEAR
V/P
D You need to confirm the programme number the first
time you programme the video recorder with VIDEO
Plus+.
D If VIDEO Plus+ does not recognise the TV channel,
'SELECT PROG' will appear on the TV screen.
Instead of 'E2', you can select the programme
number you want with the number buttons
confirm with the
OK
D If 'CODE ERROR' appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the
STANDBY m
D If 'DAILY ERROR' appears on the TV screen, the
date was incorrectly entered. Daily programming
can only be used for recordings to be made from
Monday to Friday.
D Use the
button to switch 'VPS/PDC' on or
SELECT
off.
gCL
CLEAR
OK
20:00
21:30
gCL
g
SELECT
OK
0-9
button.
button.
and
17
Hide quick links:
Advertisement
Table of Contents
