An Operator Calls The Terminal - Ericsson Dialog 4224 Operator User Manual

ê
Ò
< Clear
Dialog 4224 Operator

An operator calls the terminal

When an operator dials the common operator number, the display
shows:
Display example:
The common operator number (9) is dialed.
C= 1 I= 0 INTERNAL
OPERATOR INCOMING
202
MARY WATERS
Note: If the operator has dialed your individual operator
number, this number is shown instead of the common
number.
Press to answer the call.
< Speech key lamp is switched on and you are connected to the
calling party.
Inquiry
When an extension contacts the operator with an external call put
on hold, proceed in the same manner as section
calls the terminal" on page 32.
To reconnect the extension to the external line:
Press.
The terminal is cleared.
To connect the terminal to the external call:
Ask the extension to replace the handset.
When the extension replaces the handset you are automatically
connected to the caller. The display shows
external line data.
Incoming Calls
9 15:25
"An extension
, and the
TRK TRANSFER
33