Heat Setting Selection; Activating The Power Function - Electrolux EHD6690X Installation And Operating Instructions Manual

Ceramic glass induction hob
Table of Contents

Advertisement

Heat Setting Selection

For setting and adjusting the heat setting (1 to 9)
for the selected cooking zone.
Use sensor field + to increase the heat setting.
Lower the heat setting with sensor field -.
3
If several cooking zones are being used simul-
taneously, the required cooking zone must be
selected by touching the appropriate sensor
field before adjusting the heat setting. The
decimal point in the display shows which
cooking zone has been selected.

Activating the Power Function

Using the power function you can increase the pow-
er of both front cooking zones for 10 minutes.
With this function you can, for example, bring a large
quantity of water rapidly to the boil or brown meat.
To switch on the power function, the cooking zone
must be selected (decimal point in the display).
Touch
the
"Power-function"
p appears in the display. The power function is now
active.
3
The power function will be activated for a
maximum of 10 minutes. Following this the
cooking zone automatically switches to heat
setting 9.
The power function can be switched off in the follow-
ing way:
• Touching the "Power function" sensor field .
• Touching the sensor field _.
1
As soon as the power function is activated for
one of the front cooking zones, less heating
power is given to the rear cooking zone.
If the power function for the front right cooking zone
is activated, the rear left cooking zone can attain a
maximum heat setting of "8".
If the power function for the front left cooking zone is
activated, the rear right cooking zone can attain a
maximum heat setting of "7".
If a higher setting than 7 or 8 is set for the rear cook-
ing zones, the display for the rear cooking zone con-
cerned will show the differing settings alternately
(e.g., 7 and 9).
As soon as the power function has ended (after a
maximum of 10 minutes), the rear cooking zones au-
tomatically revert to their previously set heat setting.
sensor
field .
13

Advertisement

Table of Contents
loading

Table of Contents