Troubleshooting - Daewoo DF-7150D User Manual

Troubleshooting

Troubleshooting
Check the following guide for the possible cause of a problem before contacting customer support.
Symptom Cause
No power. The power cord is disconnected.
No picture. The TV is not set to receive DVD
Recorder+VCR signal output.
The video cable is not connected
securely.
The TV power is turned off.
No sound. The equipment connected with the
audio cable is not set to receive DVD
Recorder+VCR signal output.
The audio cables are not connected
securely.
The power on the equipment
connected with the audio cable is
turned off.
The audio cables are damaged.
Playback picture is poor. The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on
another VCR.
DVD Recorder+VCR does No disc is inserted. No tape is
not start playback. inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The Parental Control level is set.
Picture from external The video signal from the external
input is distorted. component is copy-protected.
Some channels are skipped The skipped channels were deleted
over when using [PR+/–]. with the 'Adjust Channels' feature.
Picture or sound of Antenna or cables are loose.
broadcasting channel is Wrong Tuning Band is selected in the
weak or missing. DVD Recorder+VCR Setup menu.
Camcorder image not Camcorder is off.
shown.
Camcorder image via A/V DVD Recorder+VCR's source is not set
input to DVD Recorder+ to AV, AVF, or DV.
VCR is not shown on TV
screen.
Can't play disc recorded The disc was not finalized (or not made
on this DVD compatible if using a DVD+RW).
Recorder+VCR on another Some players will not play even a
DVD player. finalized disc.
56
Solution
Plug the power cord into the wall outlet
securely.
Select the appropriate video input on the
TV so the picture from the DVD
Recorder+VCR appears on the TV screen.
Connect the video cable securely.
Turn on the TV.
Select the correct input mode on the audio
receiver so you can listen to the sound
from the DVD Recorder+VCR.
Connect the audio cables securely.
Turn on the equipment connected with the
audio cable.
Replace with new ones.
Clean the disc.
Clean the video heads.
Use [Tracking +/–] for manual tracking
adjustment while a tape is playing.
Insert a disc or tape. (Check that the disc
indicator on the front panel display is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Parental Control function or
change the rating level.
You cannot connect via the DVD
Recorder+VCR. Connect the component
directly to your TV.
Use the 'Adjust Channels' feature to
restore channels.
Tighten connections or replace cable.
Try all 'Auto Set' options; see page 23 for
details.
Turn camcorder on and operate properly.
Use [INPUT] to select AV input channel
(AV, AVF, or DV).
Finalize the disc; see page 50.
No solution.
Symptom Cause
Discs recorded with copy-once
material cannot be played on other
players.
Cannot record or did not The remaining blank space on the
record successfully. disc is insufficient.
The source you are trying to record is
copy-protected.
When setting the recording channel,
the channel is tuned on your TV's
tuner.
Timer Recording not Clock in DVD Recorder+VCR is not set
possible. to correct time.
Timer has been programmed
incorrectly.
TIMER indicator light does not appear
after programming timer.
Stereo Audio Record TV is not Stereo-compatible.
and/or Playback not Broadcast program is not in stereo
present. format.
DVD Recorder+VCR A/V Out jacks are
not connected to TV A/V In jacks.
DVD Recorder+VCR Audio/Video Out is
not selected for viewing at the TV.
DVD Recorder+VCR's TV audio
channel is set to BIL or MONO.
The remote control is not pointed at
the remote sensor of the DVD
Recorder+VCR.
Remote control does not The remote control is too far from the
work properly. DVD Recorder+VCR.
There is an obstacle in the path of the
remote control and the DVD
Recorder+VCR.
The batteries in the remote control are
dead.
DVD RESET :
If the set is in malfunction, press [DVD/VCR] key on the front panel for 4 seconds. As this set is Digital
Multimedia Product, malfunction may occurs.
Moisture Condensation
Moisture condensation can occur:
When the DVD Recorder+VCR is moved from a cold
place to a warm place.
Under extremely humid conditions.
Troubleshooting
Solution
No solution.
Use another disc.
You cannot record the source.
Select the channel on the DVD
Recorder+VCR's built-in TV tuner.
Set clock to correct time. See 'Set Clock'
on page 23.
Reprogram Timer. See 'Timer Recording'
on page 45.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is available
only via A/V output from DVD
Recorder+VCR.
Select AUX or A/V source as TV input.
Set TV audio channel mode to Stereo.
See 'Changing the TV Audio Channel' on
page 33.
Point the remote control at the remote
sensor of the DVD Recorder+VCR.
Operate the remote control within 23 ft
(7m).
Remove the obstacle.
Replace the batteries.
In locations where moisture condensation may occur:
Keep the DVD Recorder+VCR plugged into an AC
power outlet with the power on. This will help
prevent condensation.
When condensation has occurred, wait a few hours
for the DVD Recorder+VCR to dry before using it.
57