Daewoo DF-7150D User Manual page 13

9
Use [.../†] to select 'Auto Search'.
10
Search the real channel number by pressing [œ/√].
11
Select 'Fine Tune'. You can adjust the fine tuning.
12
Use [.../†] to select 'Store Channel'. Press [ENTER] to move to the
second level.
13
Use [.../†] to select program number to store and press [ENTER] to
confirm.
14
Use [.../†] to select 'Program Name'. Press [√] to move to the second
level. If your DVD Recorder+VCR is showing no station name or is
showing a station name incorrectly, you can correct this.
15
Either select the name from the stored list or you create the station
name and enter a 4-digit name. Change the letters with the [.../†],
move the next letter with the [œ/√].
• To save the 'Program Name' , you must set the 'Store Channel' again. Repeat the same procedure 12~13.
22
Initial Setup
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Select Channel
Program Name P-01
To Store
Instructions
PR-01
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH-02
Fine Tune
Decoder N/A
Store Channel PR-01
Edit Channel
Program Name P-01
Name
Instructions
P – 0 1
Enter-Confirm Setup-Exit Move ...†
Auto Set
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving
up to 99 channels. These include VHF channels 00-14, UHF channels 27-69 and
CATV channels 1-41.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in 'Connecting Antenna/Cable' on page 15.
1
Follow steps 1-2 as shown under 'Manual Set'.
2
While 'Installation' is selected, press [.../†] to select 'Auto Set'.
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner's memory.
• After Auto Set is complete, follow the instructions above to make sure that
Tuning Band is set correctly.
Set Clock
1
Follow steps 1-2 as shown under 'Manual Set'.
2
Use [.../†] to select 'Set Clock'.
3
Press [ENTER]. The 'Set Clock' menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
.../† (up/down): Changes the setting at the current cursor position.
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
Initial Setup
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move ...†
Installation
Searching for available TV stations:
5 channels found
Please wait...
Instructions
Setup-Exit
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move ...†
Set Clock
Please set the clock:
...
Time : 13 : 00
†
Date : 02 \ Jan \ 2010 (Sat)
Instructions
Enter-Confirm Setup-Exit Move ...†
23