Timer Recording Troubleshooting - Daewoo DVR-S06 User Manual

DF-Q74D2N-JS 2005.12.8 5:8 PM
• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer
Recording.
• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use
the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.
• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings
are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
• Use [...†] to select the program you want to erase on the Timer Recorder List. Press [ISTOP] to delete the
program.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [ISTOP] for 3
seconds.

Timer Recording Troubleshooting

Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
• No disc is loaded.
• A non-recordable disc is loaded.
• Disc is protected in the 'Disc Operation' menu; see page 47.
• There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• You should set only one Timer Recording.
• You can choose replace old Timer Recording or not.
• Only one Timer recording will work.
Confirmation is not possible when:
• Disc is protected in the 'Disc Operation' menu; see page 47.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows 'Rec. OK'.
44
˘ ` 44 mac001 1200DPI 90LPI
Timer Recording
Recording time is overlapped with
existing entry.Replace it?
Timer Recording
OK Cancel