Preferences / Vcr; System Information - Daewoo DF-7150D User Manual

8
Press [ENTER] to confirm your rating selection, then press [SETUP] to exit
the menu.
Change Password
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'.
2
Press [ENTER]. The 'Parental Controls' submenu appears.
3
Use [.../†] to select 'Change Password' then press [ENTER].
4
The 'Change Password' submenu appears. Enter your current 4-digit
password.
5
Enter a new 4-digit password. Re-enter the new password to confirm, press
[ENTER].
Master Password :
• If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
Set Parental Country Code
1
While 'Preferences' is selected, press [†] to select 'Parental Controls'. Then
press [†] to select 'Set Parental Country Code'.
2
Press [ENTER]. Enter your current 4-digit password then press [ENTER].
3
Use [.../†] to select the desired country and press [ENTER] to confirm.
30
Initial Setup

PREFERENCES / VCR

Parental Control
This feature enables you to search for Index marks or specific times on your VHS
tapes.
Set Parental Level ADULT
Change Password
1
Set Parental Country Code
2
3
Instructions
4
Enter-Confirm Setup-Exit Move ...†
5
Parental Control
6
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Change Password
Current Code * * * *
Enter New Code * * * *
Confirm Code * * _ _
Instructions
Setup-Exit Enter-Confirm

System Information

System Information helps service personnel identify key firmware information
Parental Control
about your DVD Recorder+VCR in case service is required.
Set Parental Level ADULT
Change Password
Set Parental Country Code
Instructions
Enter-Confirm Setup-Exit Move ...†
Parental Country Code
Please select Country for Parental Setup
...
Australia
†
Belgium
Denmark
Finland
France
Instructions
Enter-Confirm Setup-Exit Move ...†
While 'Preferences' is selected, press [†] to move to the second level.
Use [.../†] to select 'VCR'.
Press [ENTER] to display the submenu.
Select 'Index+', 'Index–' or 'Go to Zero'.
If you select 'Index+' (or 'Index–') and press [ENTER], your DVD Recorder+
VCR will locate your index mark and begin playback.
If you select 'Go-To Search' and press [ENTER], your DVD Recorder+ VCR will wind to the position 0:00:00
and stop.
VCR VCR
Index+ Index+
Index– Index–
Go to Zero Go to Zero
• The VCR menu is activated only when a video cassette tape is inserted.
Initial Setup
Preferences
Video
Audio
Parental Controls
Auto Settings N/A
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
VCR
Index+
Index–
Go to Zero
System Info
Version EP Set 1.0
Main Build DR3-1.0.2
Micom Software 0.0.0
DVD Navigation 1.0.0
Loader Version DVS-RA20
Instructions
Enter-Confirm Setup-Exit
Move ...†
31