Table of Contents
Advertisement
2nd scart socket
2nd scart socket
If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on
pages 12-15.
2nd scart
When connecting other equipment please refer to their manuals for further information. This video manual
recommends the set up as shown on page 12. When connected by this method if the equipment is turned off the
video behaves as normal, but if the equipment is turned on the video will automatically switch over to AV2
mode and displays the channel of the other equipment, channel selection can only be performed by the other
equipment, the video PR+/PR- buttons have no effect.
To return to normal video use the other equipment must be turned off.
Recording from other Equipment.
Simple recording can be performed, ensure the equipment is turned on and is displaying the correct channel.
Timer recording, set the video to perform a timed recording ensuring AV1 is selected as the channel to be
recorded. Some equipment may have a timer which allows it to be powered on to the correct channel, if this
feature is not available the other equipment should be left powered on.
Front AV
If the video has front input sockets, it is possible to connect devices such as a
camcorder to the video. To watch a camcorder tape the video must be in
AVF mode. Recordings of this input are the same as described on page 14.
16
INPUT ONLY
INPUT+OUTPUT
Initial Installation
Switch the TV on.
You can also start "AUTO SET" in the SETUP "PR PRESET"
To tune in new stations (manual tuning) and to enter station names see page 24-25.
Setting up the player
You should see this picture the first time you switch on the TV
1
and player.
Choose your language.
Then choose your country.
2
For selecting the country, refer to the followings.
B: Belgium
I: Italy
D: Germany
LUX: Luxembourg
DK: Denmark
N: Norway
E: Spain
NL: Netherlands
GR: Greece
S: Sweden
OK for "AUTO SET!".
3
"AUTO SET" tunes in all the stations you can receive in your
country.
Clock is automatically set.
If other stations are positioned on near the current RF OUTPUT
4
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
Press the [OK] button to confirm the recommended PR.
5
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.
Else ...
exit the basic installation function and enjoy your player.
• If you don´t see this picture, because you don´t use a SCART cable,
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
•
In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
"AUTO SET".
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
PR+/-:SELECT
OK:CONFIRM
SETUP:END
COUNTRY SET
B
N
D
NL
SF: Finland
DK
S
E
SF
CH: Switzerland
GR
CH
I
TR
TR: Turkey
LUX
OTHERS
PR+/-:SELECT
OK:CONFIRM
SETUP:END
CH 25
PLEASE WAIT...
SETUP:END
RF OUTPUT SET
CURRENT
CH 52
RECOMMENDED
CH 54
0-9:SELECT(21-69)
OK:CONFIRM
SETUP:END
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
MANUAL SET
PR01 ARD
PR08 P-08
PR02 ZDF
PR09 P-09
PR03 P-03
PR10 P-10
PR04 P-04
PR11 P-11
PR05 MTV
PR12 ----
PR06 P-06
PR13 ----
PR07 P-07
PR14 ----
PR+/-:SELECT
OK:CONFIRM
SETUP:END
17
Advertisement
Table of Contents
