Tuning In The Programmes (Atss); Before You Start - Daewoo DTE-28 Instruction Manual

Before you start

1 Make sure you have followed steps 1 to 5 under 'Setting up your television' and read 'Stand-by mode'.
2 If you have a video recorder connected with the aerial lead, switch it on to produce a test picture, or play a
video tape.
3 If you have a satellite receiver (or any other piece of equipment as well as the video recorder) connected
with the aerial lead, make sure that it is plugged in and that it is on stand-by.
4 Switch on the television. If the screen does not light up, please check the previous sections 'Supply power',
'Switch on the television' and 'Stand-by mode'.
1
menu Press the MENU button to make the picture, sound,
features and install boxes appear on the screen.
• Whenever a menu is displayed, if you do not press a
PR
button within 30 seconds the menu will go off.
• If you find a menu asking you to set the on-screen
menu language, press the volume increase button to
change the setting (GB stands for Great Britain).
Press the MENU button to finish.
PR
2
volume increase, PR down
PR
PR
3
OK
Press the OK button to display the INSTALL menu.
NORMAL/OK
• Make sure the country listed against 'ATSS' is the
PR
PR
Country abbreviations
PL - Poland
Tuning in the programmes
Press the volume increase button and then the PR down button to move
the green highlight to 'INSTALL'.
PR
PR
country you are in.
If you need to change the country, press one of the
volume ( ) buttons until the correct abbreviation
shows.
PR
PR
H - Hungary CZ - Czecho Other
7
PICTURE
FEATURES
PICTURE
FEATURES
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQ
NAME
PROGRAM
STORE TO
V Position
CBAdjust
W
OK Access
MENU Exit
SOUND
INSTALL
SOUND
INSTALL
GB
GB
C55
743.25
BBC1
01
01