The Sleep Function; The Mode Button - Daewoo DTE-28 Instruction Manual

Hide thumbs Also See for DTE-28:

Setup manual (13 pages)

Table Of Contents

Table of Contents

The sleep function will switch the television to stand-by after a set period of time.

Press the sleep button on the remote control

once. 'Sleep 00' will appear on the screen with

some other information. The display will only

stay on the screen for about five seconds.

Press the sleep button again while the display is on the screen and the '00' will change to '30'.

This number is the number of minutes the television will stay on for before it will switch to stand-by.

Every time you press the sleep button the time the television will stay on for will increase by 30 minutes, up

to a maximum of 120 minutes (2 hours).

If you press the sleep button when the timer is set for 120 minutes, the display will return to '00'

and the sleep timer will be switched off.

After you have set the sleep timer, you can press the recall button to see how much sleep time is left before

the television will switch off. The information display goes off after about five seconds.

The sleep timer will be cancelled if you switch the television off or put it on stand-by.

This button allows you to choose the type of sound.

Which modes are available depend on the type of sound in the television broadcast you are watching.

Press the MODE button to switch between different modes, which are shown in the table below.

The sound mode will go back to stereo when you change channels.

Dual 1 means you hear the first sound channel and dual 2 means you hear the second sound channel.

Type of broadcast

FM mono

NICAM stereo

NICAM bi-lingual (dual)

NICAM mono