The Scart And Av Sockets; Ntsc And Tint Control; Automatic Video Switching, Equipment That Can Be Connected - Daewoo DTE-28 Instruction Manual

Hide thumbs Also See for DTE-28:

Setup manual (13 pages)

Table Of Contents

Table of Contents

The scart sockets at the back of the television are a convenient way of connecting audio and video (AV) signals to

and from the television. As the signals are in a more basic form than the signal at the aerial socket, they are less

likely to be affected by interference and other things that can reduce picture quality. This television has two scart

sockets on special channels called AV1 and AV2. As well as the scart sockets, the video and audio input sockets

behind the front control flap provide a different way of connecting to the AV2 channel, but you cannot use scart

socket 2 and these sockets at the same time.

Selecting the scart channels

Keep pressing the AV button b

of three AV options or normal television mode. The display on the screen will follow the order in the table below,

which describes the facilities provided by the scart and AV connectors on your television.

What the

Connector

screen

shows

AV1

Rear scart 1 Yes

AV2

Rear scart 2 Yes

The AV inputs on the front of the television.

AV2

You cannot use scart socket 2 and these sockets at the same time.

SVHS

Rear scart 2 is the S-video input

Programme Back to normal television

information

Video and RGB

The sharpest and clearest possible picture is reproduced from separate red, green and blue signals (RGB) which

are usually produced by digital equipment. Digital equipment and other equipment also produces the video signal

which contains all the picture information in just one connection (CVBS for composite video, blanking and

synchronisation).

S-video or S-VHS

'S' stands for 'super' and 'VHS' is a type of video recording system. If a video recorder has the S-VHS feature, it

can be connected to the scart socket AV2 to get better-quality pictures than ordinary videos can give. You must

use a scart lead made for S-VHS (or S-video). Other equipment, like DVD players, may have a super-video

output.

NTSC and tint control

Imported video discs and cassettes may be recorded with the NTSC television system which is used in America

and Japan. This television can play NTSC videos as long as the video recorder is connected through the scart

socket and not the aerial cable. While reproducing NTSC video, the picture menu has a tint control on it which you

can adjust to get the best appearance of natural colours on the picture (see 'Menus for controlling and setting up

the television'). Other kinds of video do not need a tint control.

Automatic AV mode or 'video' switching

Some equipment provides an automatic switching signal, so that the video recorder (or other equipment) tells the

television to reproduce its video and audio signals. You can over-ride the automatic switching signal by pressing

the AV button b

b until you get back to normal programme numbers.

Automatic switching signals do not always agree. If this happens you will have to buy a scart lead without the

video-switching signal connection.

Equipment you can connect to this television

You can use the scart sockets to connect video recorders, camcorders, satellite receivers, video disc players,

audio amplifiers and video games to this television. We cannot guarantee that all combinations of equipment will

work.

What is the second scart socket for ?

There are other possible combinations besides the ones we have given you. When you have some experience,

you might want to change the connections and use the extra socket. For example, you could feed sound signals

out to a surround-sound amplifier or connect a DVD player with S-video output.