Editing Programmes; Move A Channel, Delete A Channel, Skip - Daewoo DTE-28 Instruction Manual

Hide thumbs Also See for DTE-28:

Setup manual (13 pages)

Table Of Contents

Table of Contents

Press the menu button.

• Remember, the menu will go off if you do not press a button within 30 seconds.

• You can keep pressing the MENU button at any time to return to normal viewing.

Use the PR buttons to highlight

'EDIT'.

'PR' is the programme number you store a broadcast channel under.

'NAME' is either read automatically from the broadcast, or you create it.

'CH' is the broadcast channel number.

'SKIP' - see below.

Move a channel

When the channel is not on the programme number you want it on, you

can move it.

1 Use the PR buttons to highlight the channel you want to move.

The picture for that channel will show behind the menu.

2 Press the green MOVE button on the remote control, the highlight will

change to red, and the green block on the screen will be

labelled

Confirm.

3 Use the PR buttons to move the red highlight onto the programme

number where you want to put the channel.

4 Press the green MOVE button to finish the move.

Delete a channel

1 Use the PR buttons to highlight the channel you want to delete. The picture for that channel will show behind

the menu.

2 Press the yellow DELETE button on the remote control. The highlight will change to red for a moment and the

programme list shifts down to get rid of the empty slot.

Skip

You set the tick mark under 'SKIP' so that you can't select a programme with the PR buttons.

1 Use the PR buttons to highlight the programme number where you want to set or remove the tick mark. The

picture for channel will show behind the menu.

2 Press the red SKIP button on the remote control to set the tick mark or to remove it.