Swicthing The Set On/Off; Tuning The Tv Channels - Daewoo DTT-3250-100D Instruction Manual

SWITCHING THE SET ON AND OFF
Switching On
Switch the set on with the ON/OFF button in front of the receiver TV. The set will be turn on.
If not, press either : - PR UP or DOWN button at the side of set - or POWER button or the PR
UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.
The STAND-BY INDICATOR turns "RED" to "OFF", then picture will appear on the screen.
Switching Off
Press POWER button on the remote controller to return the set to its stand-by mode.
The STAND-BY INDICATOR will illuminate.
If you don't use the set for extended period of time, turn it off with ON/OFF button in front of the
receiver.
Auto-power-off
If broadcasting signal is not present for 30 minutes, the TV will automatically turn off after about 30
minutes. However, if the Sleep time is operating, it takes precedence.
This Auto-Power-Off function does not operate in the "AV1", "AV2" or "AV3" mode.

TUNING THE TV CHANNELS

AUTO SETUP SYSTEM
1. Press the MENU button to select INSTALL.
2. Press the PRy / x buttons and then select INSTALL.
3.Press the VOL UP(B) button.
4. Select ATSS NATIONS with VOL UP/DOWN button.
Press and hold for more than 1 second the OK button to start
AUTO SETUP.
5. Please wait until the EDIT menu appears.
5
Install
Atss Ireland
Edit Access
System EURO
Channel C40
Frequency 627.20MHz
Name -----
Program 10
Store To 10
Position Position Menu : Exit
Access Access
Position Position
Install
Atss Ireland
Edit Access
System EURO
Channel C40
Frequency 627.20MHz
Name -----
Program 10
Store To 10
Position Menu : Exit
Adjust
Position OK : Access